- F&L Gear Bearings Co., ltd
- Cross roller Slewing Ring Bearing IMO Slewing Ring Bearing YRT rotary bearing
English
- Address2-4-28 Dyomachibori, Mishi-Lu, Esaka-shi, Asaka 661-11114, Japan
- Worktime9:00-18:00
- Phone(Working Time)476-379-8357
- Phone(Nonworking Time)476-379-8357
- Fax86-12-7891
Ball and roller Slewing Ring
Contact NowBall and roller Slewing Ring is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races.
The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least three races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|---|---|---|---|
| CRBD 03515A crossed roller bearing 35x95x15mm with mounting holes | Cast Iron | Non-Rubberized | Grip Tight Ball Bear | Baldor-Dodge |
| Three-row Roller Slewing Ring Bearings | 32.6 mm | UC210-30G2T04 | 100 °C | 117 mm |
| BRSA400SVDBCP100 angular contact ball bearings | 6 mm | FC204N- | 0.73 kg | 15.5 mm |
| Hiwin rigid crossed roller bearings CRBD 02012A | 18mm | 120 mm | 50.8 mm | 14.9 mm |
| Palletizer Robot Bearing | 105 mm | 140 mm | UC205G2 | 14 kN |
| Wind Turbine Bearing | 62 mm | 60 mm | 25 mm | 11.5 Nm |
| BRS344-0605-1 slewing bearing internal gear | 110 mm | 2 mm | 0.42 Hz | 99 mm |
| Timing Belt Gear Slewing ring for industrial robot | 119 mm | UC206-19G2L4 | 15.9 mm | 19.05 mm |
| E.144.08.15.D2V Slew Ring | 43.5 mm | 41.5 mm | 15 mm | M6x1 |
| Conveyor Turntable Slew Bearing | 55 mm | 19.3 mm | -20 °C | 25.8 mm |
| MTO-050 Small Slewing Ring KAYDON TIMKEN USA | 16mm | 19.5 kN | 40.2 mm | 0.98 kg |
| RK6-22P1Z slewing bearing for industrial positioners | 42.9 mm | FL205- | -20 °C | 17.4 mm |